[Yuriy_SPb]

Часть параметров по климат-контролю (как всегда спасибо Ув. cintakc):

Скрытый текст

"OUT3 Cond Interior temperature","Int. Temp","2110","(A/4)-16","-16","50","grad","688"
"OUT3 Cond Air thermo sensor","Air. Temp","2110","(B/4)-16","-16","50","grad","688"
"OUT3 Cond Pressure","Pressure","2110","(C*3.3)/255","0","3.3","MPa","688"
"OUT3 Cond Solar Sensor","Solar Sensor","2110","(D*5.5)/255","0","1500","W/m^2","688"
"OUT3 Cond Engine coolant temperature","Eng. Temp","2110","E-40","-40","215","grad","688"
"OUT3 Cond Ambient Temperature","Amb. Temp","2111","(A/2)-40","-40","90","grad","688"
"OUT3 Cond Engine RPM","Eng. RPM","2113","(B*256)+C","0","7000","rpm","688"
"OUT3 Cond Vechile Speed","Speed","2113","(D+(E/255))*2","0","250","km/h","688"
"OUT3 Cond Leak Indicator","Leak Ind.","2132","{A:0}","0","1","no/yes","688"
"OUT3 Cond Leak Indicator (20%)","Leak Ind. (20%)","2132","{A:2}","0","1","no/yes","688"
"OUT3 Cond A/C Compressor drive request","Comp. Req.","2123","{A:0}","0","1","off/no","688"
"OUT3 Cond Air conditioning switch","Cond Switch","2123","{A:1}","0","1","off/no","688"
"OUT3 Cond A/C Compressor drive flag","Comp ON/OFF","2170","{A:0}","0","1","off/on","688"
"OUT3 Cond Dr temperature setting","Dr. Temp","2134","A/2","0","50","grad","688"
"OUT3 Cond As temperature setting","As. Temp","2134","B/2","0","50","grad","688"
"OUT3 Cond Dr temperature setting (corr.)","Dr. Temp (corr)","2134","C/2","0","50","grad","688"
"OUT3 Cond As temperature setting (corr.)","As. Temp (corr)","2134","D/2","0","50","grad","688"

[свернуть]

Для доступа к блоку климат-контроля необходим отдельный профиль со строкой инициализации

atsp6\natfcsh688\natfcsd30080a\natfcsm1

и во все дополнительные пиды по климат-контролю добавить:
команду старта диагностики - atcra511
ну и заодно команду завершения - atcra