Цитата:
Сообщение от Alexxander
По непроверенным данным мивек вкл после 4000 оборотов, может кто подскажет более точную цифру.
|
Если читать сервис мануал, то для 6B31 в
Техинформации дословно написано:
Engine-ECU turns OFF (Duty: 0 %) the oil feeder control valve at low engine speed (4,750 r/min or less). As a result, oil pressure does not act on the piston in the rocker arm and inlet valve is driven by the low speed cam. Engine-ECU turns ON (Duty: For 2 seconds after change 100 %; after 2 seconds 60 %) the oil feeder control valve at high engine speed (4,750 r/min or more). As a result, oil pressure acts on the piston in the rocker arm and inlet valve is driven by the high speed cam. It will be continually driven by the low speed cam under following conditions.
Но тут надо еще обратить внимание на
For 2 seconds after change 100 %; after 2 seconds 60 %)
Притопил - включилось.
А если едешь с 4750 и выше - "включено на постоянку".